1987-1993 Ford F-250/F-350 trucks with a 7.5L engine and a 2.50-inch catalytic converter. - Moderate sound
This Flowmaster Force II® cat-back exhaust system is custom designed for 1987-1993 Ford F-250/F-350 trucks with a 7.5L engine and a 2.50-inch catalytic converter and is perfect for the person looking for a mild to moderate sound level inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster®. This bolt-on emissions-legal system features a 3.00-inch mandrel-bent aluminized steel inlet pipe flowing into a 70 Series Big Block II™ muffler for a deep mellow tone. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with an angle cut turn down style tip behind the right rear wheel and uses the factory hanger locations. Also includes an aluminum heat shield with strap clamps to secure it to the muffler. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for a quick and easy installation you can do at home. Notes: Fits 2/4 wheel drive models and all wheelbases including Crew Cab.
- Includes Aluminum Heat Shield and Stainless Steel Clamps
- Fits All Wheelbases
- Easy Installation
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16 Gauge Aluminized Steel Tubing
- 70 Series Big Block II Performance Muffler
- Mild to Moderate Exterior Exhaust Tone
- Dyno Tuned for Maximum Performance
- Uses the Factory Hanger Locations
- 3-year Limited Warranty
Information:
Fits 1987 to 1993 Ford F-250 and F-350 trucks on a 3/4Ton or 1Ton chassis with a 7.5L engine using a 2.50 inch catalytic converter, fits 2 and 4 wheel drive models and all wheelbases including Crew Cab.
Application Summary:
| Year |
Make/Model |
| 1987-1993 |
Ford F-250 |
| 1987-1993 |
Ford F-350 |
| Attributes |
| ASIN |
B000CNHD6Y |
| Automotive Item Grade |
High Performance |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Mild exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No |
| Category |
Exhaust, Exhaust |
| Clamping Type |
U-Bolt, U-Bolt |
| Clamps Included |
Yes, Yes |
| Color |
Black Muffler; Natural Tubing |
| Color/Finish |
Silver muffler, natural tubing, Black muffler, natural tubing |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Pipe Wall Max Gauge |
16 |
| Exhaust Pipe Wall Maximum Gauge |
16 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Quantity |
Sold Separately |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Out Side |
| Exit Style |
Straight |
| Finish |
Black Muffler; Natural Tubing, Aluminized |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel |
| Mount Type |
Uses New Hangers (Included), Uses New Hangers (Included) |
| Mounting Bracket Included |
Yes, Yes |
| Muffler Body Length |
22.00, 22.00 |
| Muffler Body Material |
Aluminized Steel, Aluminized Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Color |
Black, Black |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Inside Diameter |
3.00, 3.00 |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Quantity |
1, 1 |
| Muffler Series |
70 Series, 70 Series Big Block |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Part Type |
Exhaust System, Exhaust System Kit |
| Pipe Color |
Silver, Silver |
| Pipe Material |
Aluminized Steel, Aluminized Steel |
| Pipe Wall Gauge |
16 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Sound Level |
Moderate, Moderate |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00, 3.00 |
| Tail Pipe Quantity |
1, 1 |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
N/A |
| Tip Size |
3 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Type |
Cat-Back, Cat-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
36 |
| GTIN |
00700042015139 |
