1991-1995 Jeep Wrangler with a 4.0L HO engine. Fits 4-wheel drive only. - Mild sound
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster® Cat-back exhaust system provides, the Force II® systems are the perfect choice. This system is manufactured with durable aluminized steel and starts with a 60 Series™ performance muffler that delivers a moderate exterior sound with a mild interior tone. The 2.25-inch mandrel-bent tailpipe exits out the back and is finished off with a 2.50-inch brushed stainless steel exhaust tip. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage and includes all necessary parts and hardware for easy installation. All aluminized steel exhaust systems are backed by our 3-year Limited Warranty. Notes: Fits 4-wheel Drive only.
- Includes Hangers and Hardware for an Easy Installation
- 3-year Limited Warranty
- Easy Installation
- Mandrel-bent 16 Gauge Aluminized Steel Tubing
- Dyno Tuned for Maximum Performance
- Over 35+ years of Flowmaster Quality
- 3.00-inch Brushed Stainless Steel Tip
- Uses the Factory Hanger Locations
- 60 Series Performance Muffler
- Mild Exterior Exhaust Tone
Information:
Fits 1991-1995 Jeep Wrangler with a 4.0L HO engine, fits 4 wheel drive only.
Application Summary:
| Year |
Make/Model |
| 1991-1995 |
Jeep Wrangler |
| Attributes |
| 2WD/4WD |
4WD |
| ASIN |
B000CEG2BK |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Mild exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No |
| Category |
Exhaust, Exhaust |
| Clamping Type |
U-Bolt, U-Bolt |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Drive |
4WD, 4WD |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Diameter |
2.50, 2.50 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
1, 1 |
| Exhaust Type |
Single |
| Exit Position |
Single Rear, Single Rear Exit |
| Exit Style |
Straight |
| Finish |
Aluminized, Aluminized |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Diameter |
2.250 in., 2.25 |
| Inlet Diameter (in) |
2.25 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/4 |
| Material |
Aluminized Steel |
| Mounting Bracket Included |
No, No |
| Muffler Body Height |
5.00 |
| Muffler Body Length |
13.50, 13.50 |
| Muffler Body Material |
Aluminized Steel, Aluminized Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Body Width |
10.00 |
| Muffler Count |
1 |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Inside Diameter |
2.25, 2.25 |
| Muffler Inlet Outside Diameter |
2.38, 2.38 |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
1, 1 |
| Muffler Series |
60 Series Delta Flow, 60 Series Delta Flow |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.25 |
| Outlet Diameter (in) |
2.25 |
| Outlet Outside Diameter |
2.250 in. |
| Outlet Outside Diameter (in.) |
2.25 |
| Outlet Size (in.) |
2.25 |
| Part Type |
Exhaust System, Exhaust System Kit |
| Pipe Color |
Silver, Silver |
| Pipe Material |
Aluminized Steel, Aluminized Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single |
| Single or Dual |
Single |
| Sound Level |
Mild, Mild |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.250 in. |
| Tail Pipe Outlet Outside Diameter |
2.25, 2.50 |
| Tail Pipe Quantity |
1, Single |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
2.500 in., 2.50 |
| Tip Diameter (in) |
2.5 |
| Tip Diameter (in.) |
2.5 |
| Tip Quantity |
1 |
| Tip Shape |
Round |
| Tip Size |
2.5 in. |
| Tubing Diameter |
2.250 in., 2.25 |
| Tubing Diameter (IN) |
2.25 |
| Type |
Cat-Back, Cat-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
36 |
| GTIN |
00700042016686 |
