Fits 1984-1995 Ford F-150, F-250 and 1985-1995 Bronco with 5.0L V8 gas engine.
Flowmaster's new Federal legal direct fit catalytic converter is for the 1984-1995 Ford F-150, F-250 and the 1985-1995 Bronco with the 5.0L engine. This stainless steel unit is a two piece assembly with a mandrel bent Y-pipe and a single converter assembly which connects to the factory exhaust system. Hardware and gaskets are included. This converter meets or s the USEPA standards and includes a 25,000 mile emissions, and 50,000/5 year exterior warranty. Please note: These USEPA Federal converters are not available for sale or use on vehicles licensed or operated in the state of California.
- Flowmaster Quality
- Meets or exceeds all USEPA 49-state requirements
- Direct Fit
- Stainless Steel
Application Summary:
| Year |
Make/Model |
| 1985-1995 |
Ford Bronco |
| 1984-1995 |
Ford F-150 |
| 1984-1995 |
Ford F-250 |
| Attributes |
| Air Tube Adaptable |
No |
| Air Tube Count |
1 |
| Assembly Length |
12.50 |
| Assembly Length (in) |
12.5 |
| Assembly Width |
7.50 |
| Assembly Width (in) |
7.5 |
| Body Height |
3.875 |
| Body Length |
12.50 |
| Body Length (in.) |
12.5 |
| Body Shape |
Oval |
| Body Type |
Clam Shell |
| Body Width |
7.38 |
| Brand |
Flowmaster, Flowmaster |
| California Air Board Approved |
No |
| California Air Resources Board (CARB) Certified |
No |
| California Proposition 65 |
Yes |
| CARB (California) Compliant |
No, No |
| CARB Executive Order Number |
Not Applicable, Not Applicable |
| Category |
Exhaust, Exhaust |
| Clamps Included |
No |
| Converter Body Size |
OEM |
| Converter Quantity |
1 |
| Core Shape |
Round |
| Core Substrate Material |
Stainless Steel |
| Country of Origin (Primary) |
US |
| Emission |
Non-California (49-State) |
| Emission Code |
2, 2 |
| Finish |
Natural |
| Fitment |
Direct EO Replacement, Direct Fit |
| Grade |
Premium Grade, Premium Grade |
| Grade Type |
Premium Grade, Premium Grade |
| Hangers Included |
No |
| Harmonized Tariff Code (Schedule B) |
8421394000 |
| Hazardous Material Code |
N |
| Heat Shield Attached |
Yes |
| Inlet Connection Type |
Flanged, Flanged |
| Inlet Diameter |
2.00, 2.00 |
| Inlet Diameter (in) |
2 |
| Inlet Gasket Included |
No |
| Inlet Inside Diameter |
1.93 |
| Inlet Mounting Hardware Included |
No |
| Inlet Mounting Hole Quantity |
4 |
| Inlet Outside Diameter |
2.06 |
| Inlet Quantity |
2 |
| Inlet Size (in.) |
2 |
| Inlet Type |
Flanged |
| Life Cycle Status Code |
Available to Order |
| Location |
Right, Right |
| Material |
Stainless Steel, Stainless Steel |
| Mounting Hardware Included |
No |
| NAFTA Preference Criterion Code |
B |
| New York Certified |
No |
| Outlet Connection Type |
Clamp On, Clamp On |
| Outlet Diameter |
2.25, 2.25 |
| Outlet Diameter (in) |
2.25 |
| Outlet Gasket Included |
No |
| Outlet Inside Diameter |
2.12 |
| Outlet Mounting Hardware Included |
No |
| Outlet Outside Diameter |
2.25, 2.25 |
| Outlet Quantity |
1 |
| Outlet Size (in.) |
2.25 |
| Outlet Type |
Non-Flanged, Clamp-On |
| Overall Length (in.) |
OEM |
| Oxygen Sensor Location |
Pre Catalyst, Pre Catalyst |
| Part Type |
Catalytic Converter, Catalytic Converter |
| Product Type |
Catalytic Converter, Catalytic Converter |
| Sale Category |
Exhaust |
| SDR Required Flag |
N |
| Sensor Port Count |
1 |
| Series |
Direct Fit Catalytic Converters |
| Sub Category |
Catalytic Converter, Catalytic Converter |
| Subcategory |
Catalytic Converters and Parts |
| Substrate Material |
Ceramic |
| Tube Material |
409 Stainless Steel |
| Universal Or Specific Fit |
Specific Fit, Specific Fit |
| Warranty Time |
12 |
| GTIN |
00700042030088 |
