Fits 1986-1993 Ford Mustang LX 5.0L & 1986 Mustang GT 5.0L
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge stainless steel tubing for maximum flow, tuck up high in the chassis for good clearance, exits straight-out the back under the rear bumper and includes long polished 304 stainless steel tips. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 842548 (Super 44 Series) or 842553 (50 Series) stainless steel mufflers. Covered by our Lifetime Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware.
- Exits Straight-out under the Rear Bumper
- Mandrel-bent for Maximum Performance
- High Clearance around Rear Differential
- Designed for Double Off-set Mufflers
- Polished 304 Stainless Steel Tips
- 16 Gauge Stainless Steel Tubing
- Does Not Include Hardware
- Lifetime Limited Warranty
- Includes Tailpipe Hangers
Information:
Fits 1986-1993 Ford Mustang LX 5.0L & 1986 Mustang GT 5.0L engines. Use with Side Inlet/Opposite Side Outlet mufflers.
Application Summary:
| Year |
Make/Model |
| 1986-1993 |
Ford Mustang |
| Attributes |
| 2WD/4WD |
2WD, 2WD |
| ASIN |
B005X628O2 |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Exits at rear of vehicle |
| Bullet Point #3 |
1 pair |
| Bullet Point #4 |
Premium Quality |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band |
| Clamps Included |
No |
| Color |
Silver |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Tip Quantity |
2, 2 |
| Exit Position |
Dual Rear, Dual Rear Exit |
| Finish |
Natural, Natural |
| Flanged Inlet |
No, No |
| Grade Type |
Performance, Performance |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.37, 2.37 |
| Inlet Outside Diameter |
2.50, 2.50 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Part Type |
Exhaust Tail Pipe, Exhaust Tail Pipe |
| Position |
N/A |
| Product Type |
Exhaust Accessories, Exhaust Accessories |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Builder Accessories |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Miscellaneous Exhaust |
| System Type |
Tailpipe, Tailpipe Kit |
| Tapered Outlet |
No, No |
| Tip Diameter |
2.500 in., 2.50 |
| Tip Diameter (in) |
2.5 |
| Tip Diameter (in.) |
2.5 |
| Tip Quantity |
2, 2 |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Universal Or Specific Fit |
Specific Fit, Specific Fit |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| Welded Hanger |
Yes, Yes |
| GTIN |
00700042025015 |
