Fits 2016-2024 Camaro SS, ZL1 with 6.2L engine with Factory NPP Exhaust option. - Aggressive sound
The Flowmaster® American Thunder® Axle-back system for the 2016-2024 Camaro SS & ZL1 with the 6.2L engine, is perfect for the person looking for a powerful and very aggressive sound quality in Track mode, while maintaining a deep mellow tone for everyday driving. This kit features tandem 40 Delta Flow™ Series mufflers for daily driving, along with a pair of our race-proven Outlaw® mufflers that actually increase the open exhaust sound when in Track mode. The system is finished off with large quad 4.00-inch polished stainless steel tips replicating the factory quad NPP exhaust look. Includes functional exhaust valves to work with the O.E. actuator motors to select between sound levels. The exhaust system is full stainless steel and is covered by Flowmaster's Lifetime Limited Warranty. Designed for an easy fit on both coupe top and convertible models with the factory NPP option (identified by quad tips.) The system includes all necessary parts and hardware for installation. Note: Be sure to check out our Scavenger Series® X-pipe, #81083 for 6-spd manual with factory MDS valves, designed to replace the factory mid-pipe and the flattened section of the factory tubing.
- Compatible with Our Scavenger Series Mid-pipe
- Dyno Tuned For Maximum Performance
- Deep Powerful Sound in Stealth Mode
- Aggressive Race Sound in Track Mode
- Uses the Factory Hanger Locations
- Includes High Quality Valves
- Stainless Steel Construction
- Lifetime Limited Warranty
Information:
Fits 2016-2024 Camaro SS, ZL1 with 6.2L engine with Factory NPP Performance Exhaust option with Quad Tips.
Application Summary:
| Year |
Make/Model |
| 2016-2024 |
Chevrolet Camaro |
| Attributes |
| ASIN |
B01MG6GTNA |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Dyno Tuned For Maximum Performance |
| Bullet Point #3 |
Dual Mode Operation |
| Bullet Point #4 |
Made in the USA |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No, No |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust Tip Diameter |
4.00, 4.00 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Length |
5.25 |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
4, 4 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Out Rear |
| Exit Style |
Straight |
| Finish |
Natural, Natural |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Material |
409 Stainless Steel |
| Mount Type |
Uses Factory Hangers, Uses Factory Hangers |
| Mounting Bracket Included |
No, No |
| Muffler (Left Outside) Body Height |
4.00, 4.00 |
| Muffler Body Diameter |
4.00, 4.00 |
| Muffler Body Height |
4.00 |
| Muffler Body Length |
12.00, 13.25 |
| Muffler Body Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Oval, Round |
| Muffler Body Width |
4.00, 9.50 |
| Muffler Count |
2 |
| Muffler Finish |
Black |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Diameter |
3.000 in., 3.00 |
| Muffler Inlet Diameter (in) |
3 |
| Muffler Inlet Diameter (in.) |
3.000 |
| Muffler Inlet Inside Diameter |
3.00, 3.00 |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
3.000 in., 3.00 |
| Muffler Outlet Diameter (in) |
3 |
| Muffler Outlet Diameter (in.) |
3.000 |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
2, 2 |
| Muffler Series |
40 Series Delta Flow Outlaw, 40 Series Delta Flow, Outlaw |
| Muffler Shape |
Oval |
| Muffler Type |
Welded Baffle, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Part Type |
Exhaust System Kit, Exhaust System |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| Sale Category |
Exhaust |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Aggressive, Aggressive |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Cut |
Angle |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Edge Style |
Cut |
| Tip Finish |
Polished |
| Tip Length |
5.250 in., 5.25 |
| Tip Length (in) |
5.25 |
| Tip Length (in.) |
5.25 |
| Tip Logo |
Embossed, Embossed |
| Tip Material |
304 Stainless Steel, 304 Stainless |
| Tip Quantity |
4 |
| Tip Shape |
Round |
| Tip Size |
4.0 in. |
| Tip Style |
Double wall |
| Tip Type |
Double Wall |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Axle-Back, Axle-back |
| Valve Actuator Included |
No, Reuse OEM |
| Valve Included |
Yes, Yes |
| Valve Type |
OEM-Style Valves, OEM-Style Valves |
| Warning |
California Proposition 65, California Proposition 65 |
| GTIN |
00700042032488 |
