Fits 2018-2023 Mustang GT 5.0L without Factory Active Performance Exhaust Valves. - Aggressive to moderate sound
The Flowmaster American Thunder® Axle-back exhaust system for the 2018-2023 Ford Mustang GT with the 5.0L engine is perfect for the person looking for an aggressive exterior sound level with all of the performance benefits that you would expect from Flowmaster®. This bolt-on 409S stainless steel system features 3.00-inch mandrel-bent tubing and two Super 44® series mufflers for maximum power and exterior sound quality, but with a moderate and pleasant interior tone at cruising speeds. The system is finished off with quad 4.00-inch polished 304 stainless steel tips. This system includes all necessary parts, hardware and instructions for an easy installation. NOTE: This kit will not fit vehicles with the Active Performance Exhaust option. Note: Fits Coupes & Convertibles.
- Quad 4.00-inch Polished 304 Stainless Steel Tips
- Dyno-Tuned for Maximum Performance
- Uses the Factory Hanger Locations
- 409S Stainless Steel Construction
- Moderate/Aggressive Sound
- Lifetime Limited Warranty
- Flowmaster Quality
- Easy Installation
Information:
Fits 2018-2023 Mustang GT 5.0L Coupes & Convertibles without Factory Active Performance Exhaust Valves.
Application Summary:
| Year |
Make/Model |
| 2018-2023 |
Ford Mustang |
| Attributes |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Dyno-Tuned for Maximum Performance |
| Bullet Point #2 |
409S Stainless Steel Construction |
| Bullet Point #3 |
Moderate/Aggressive Sound |
| Bullet Point #4 |
Made in the USA |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No, No |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust Tip Diameter |
4.00, 4.00 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Length |
5.25 |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
4, 4 |
| Exhaust Type |
Axle-Back |
| Exit Position |
Dual Out Rear |
| Finish |
Natural, Natural |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Material |
409 Stainless Steel |
| Mount Type |
Uses Factory Hangers, Uses Factory Hangers |
| Mounting Bracket Included |
No, No |
| Muffler (Left) Body Height |
4.00 |
| Muffler (Left) Body Length |
13.25 |
| Muffler (Left) Body Width |
9.50 |
| Muffler (Right) Body Height |
4.00 |
| Muffler (Right) Body Length |
13.25 |
| Muffler (Right) Body Width |
9.50 |
| Muffler Body Height |
4.00 |
| Muffler Body Length |
13.000 in., 13.00 |
| Muffler Body Length (in) |
13 |
| Muffler Body Length (in.) |
13.000 |
| Muffler Body Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Body Width |
9.50 |
| Muffler Color |
Black, Black |
| Muffler Count |
2 |
| Muffler Finish |
Painted |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Diameter |
2.500 in., 2.50 |
| Muffler Inlet Diameter (in) |
2.5 |
| Muffler Inlet Diameter (in.) |
2.500 |
| Muffler Inlet Inside Diameter |
3.00, 3.00 |
| Muffler Inlet Location |
Offset, Offset |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
3.000 in., 3.00 |
| Muffler Outlet Diameter (in) |
3 |
| Muffler Outlet Diameter (in.) |
3.000 |
| Muffler Outlet Location |
Dual Outlet, Dual |
| Muffler Outlet Quantity |
2, 2 |
| Muffler Overall Length |
51.500 in., 51.50 |
| Muffler Overall Length (in) |
51.5 |
| Muffler Overall Length (in.) |
51.500 in. |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
2, 2 |
| Muffler Series |
Super 44, Super 44 |
| Muffler Shape |
Oval |
| Muffler Type |
Reflection, Reflection |
| NAFTA Preference Criterion Code |
B |
| Part Type |
Exhaust System Kit, Exhaust System |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate/Aggressive, Aggressive / Moderate |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Cut |
Angle |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Edge Style |
Cut |
| Tip Finish |
Polished |
| Tip Length |
5.250 in., 5.25 |
| Tip Length (in) |
5.25 |
| Tip Length (in.) |
5.25 |
| Tip Logo |
Embossed, Embossed |
| Tip Material |
304 Stainless Steel, 304 Stainless |
| Tip Quantity |
4 |
| Tip Shape |
Round |
| Tip Style |
Double wall |
| Tip Type |
Double Wall |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Axle-Back, Axle-back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| GTIN |
00700042037629 |
