Fits 2018-2026 Jeep Wrangler JL, 2.0L Turbo or 3.6L engine. No muffler. Both 2 door & 4 door models. - Moderate sound
The Flowmaster® American Thunder® Axle-back exhaust system for the 2018-2026 Jeep Wrangler JL is perfect for the person looking for maximum performance and ground clearance. The 2.50-inch tailpipe features a mandrel bent 409 stainless steel tailpipe finished off with a 3.00-inch polished 304 stainless steel tip and fits both 2 and 4 door models with the 2.0L Turbo or the 3.6L engine. This system replaces the factory transverse muffler reducing weight, improves ground clearance, and provides a moderate sound level that is not offensive or will be considered loud by most people. Because this system tucks the tailpipe up high, an aftermarket metal bumper is generally recommended. The exhaust system is covered by our Lifetime Limited Warranty. Designed for a perfect fit, this system includes all necessary parts and hardware for easy and quick installation you can do at home in about 15 minutes.
- Provides Maximum Off Roading Clearance
- Mandrel-bent 409 Stainless Steel Tubing
- Uses the Factory Hanger Locations
- All Stainless Steel Construction
- Moderate Sound Level
- Flowmaster Quality
- Easy Installation
Information:
Fits 2018-2026 Jeep Wrangler JL, 2.0L Turbo or 3.6L engine. Both 2 door & 4 door models.
Application Summary:
| Year |
Make/Model |
| 2018-2026 |
Jeep Wrangler |
| Attributes |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Provides Maximum Off Roading Clearance |
| Bullet Point #3 |
Moderate Sound Level |
| Bullet Point #4 |
Easy Installation |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No, No |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust Tip Diameter |
3.00, 3.00 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Length |
4.75 |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
1, 1 |
| Exhaust Type |
Axle-Back |
| Exit Position |
Side Out Rear, Single Rear Exit |
| Finish |
Natural, Natural |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield Included |
No, No |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
409 Stainless Steel |
| Mount Type |
Uses Factory Hangers, Uses Factory Hangers |
| Mounting Bracket Included |
No, No |
| Muffler Body Length (in) |
N/A |
| Muffler Color |
N/A |
| Muffler Finish |
N/A |
| Muffler Included |
Yes |
| Muffler Inlet Diameter (in) |
N/A |
| Muffler Inlet Location |
N/A |
| Muffler Material |
N/A |
| Muffler Outlet Diameter (in) |
N/A |
| Muffler Outlet Location |
N/A |
| Muffler Overall Length (in) |
N/A |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
N/A |
| Muffler Series |
None, None |
| Muffler Shape |
N/A |
| Muffler Type |
N/A, None |
| NAFTA Preference Criterion Code |
B |
| Part Type |
Exhaust System Kit, Exhaust System |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Single |
| Single or Dual |
Single |
| Sound Level |
Moderate, Moderate |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tail Pipe Quantity |
1, Single |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Cut |
Angle |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Edge Style |
Cut |
| Tip Finish |
Polished |
| Tip Length |
3.250 in., 3.25 |
| Tip Length (in) |
3.25 |
| Tip Logo |
None, None |
| Tip Material |
304 Stainless Steel, 304 Stainless |
| Tip Quantity |
1 |
| Tip Shape |
Round |
| Tip Style |
Single wall |
| Tip Type |
Single Wall |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Axle-Back, Axle-back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| GTIN |
00700042038084 |
