Fits 2018-2026 Jeep Wrangler JL 2 Door and 4 Door with 3.6L and 2.0L turbo engine. - Moderate sound
This Flowmaster® Force II® Axle-back exhaust system for the 2018-2026 Jeep Wrangler JL with the 3.6L V6 and 2.0L turbo engines is perfect for the person looking for a moderate exterior and mild interior exhaust tone, with all of the performance benefits that you would expect from Flowmaster. This bolt-on Dual Out Rear emissions-legal system features a stainless steel 80 Series™ cross-flow muffler with dual 2.50-inch mandrel-bent tailpipes which are finished off with a pair of large 4.00-inch polished Flowmaster stainless steel tips for a modern look. The system includes all necessary parts, hardware and instructions for an easy installation. Covered by our Lifetime Limited Warranty.
- Large 4.00-inch Polished Stainless Steel Tips
- Moderate Exterior Performance Tone
- Mandrel-bent Stainless Steel Tubing
- Uses the Factory Hanger Locations
- All Stainless Steel Construction
- Minimal Interior Resonance
- Lifetime Limited Warranty
- Easy Installation
Information:
2018-2026 Jeep Wrangler JL 2 Door and 4 Door with 3.6L and 2.0L turbo engine.
Application Summary:
| Year |
Make/Model |
| 2018-2026 |
Jeep Wrangler |
| Attributes |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Moderate Exterior Performance Tone |
| Bullet Point #3 |
Minimal Interior Resonance |
| Bullet Point #4 |
Easy Installation |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No, No |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Clearance Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Discount Percentage |
26-50% |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust Tip Diameter |
4.00, 4.00 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Length |
5.25 |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
2, 2 |
| Exhaust Type |
Axle-Back |
| Exit Position |
Dual Out Rear |
| Finish |
Natural, Natural |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
409 Stainless Steel |
| Mount Type |
Uses Factory Hangers, Uses Factory Hangers |
| Mounting Bracket Included |
No, No |
| Muffler Body Height |
4.00 |
| Muffler Body Length |
15.000 in., 15.00 |
| Muffler Body Length (in) |
15 |
| Muffler Body Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Body Width |
9.50 |
| Muffler Color |
Black, Black |
| Muffler Count |
1 |
| Muffler Finish |
Painted |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Diameter |
2.500 in., 2.50 |
| Muffler Inlet Diameter (in) |
2.5 |
| Muffler Inlet Inside Diameter |
2.50, 2.50 |
| Muffler Inlet Location |
Offset, Offset |
| Muffler Inlet Outside Diameter |
2.63, 2.63 |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
2.500 in., 2.50 |
| Muffler Outlet Diameter (in) |
2.5 |
| Muffler Outlet Location |
Dual Outlet, Dual Outlet - Offset (Same Side) |
| Muffler Outlet Quantity |
2, 2 |
| Muffler Overall Length |
32.000 in., 32.00 |
| Muffler Overall Length (in) |
32 |
| Muffler Overall Length (in.) |
32.000 in. |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
1, 1 |
| Muffler Series |
80 Series, 80 Series Crossflow |
| Muffler Shape |
Oval |
| Muffler Type |
Reflection, Reflection |
| NAFTA Preference Criterion Code |
B |
| Part Type |
Exhaust System Kit, Exhaust System |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| Sale Category |
Exhaust |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate, Moderate |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Material |
409SS |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Cut |
Angle |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Edge Style |
Cut |
| Tip Finish |
Polished |
| Tip Length |
5.250 in., 5.25 |
| Tip Length (in) |
5.25 |
| Tip Logo |
Embossed, Embossed |
| Tip Material |
304 Stainless Steel, 304 Stainless |
| Tip Quantity |
2 |
| Tip Shape |
Round |
| Tip Style |
Double wall |
| Tip Type |
Double Wall |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Axle-Back, Axle-back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| GTIN |
00700042038138 |
