1986-1993 Chevrolet 4.3L V6 and 5.0/5.7L V8 with 1-piece rear main seal, 168-tooth, External Balance, 30 lb
Hays Steel Flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. All Hays flywheels are certified S.F.I. spec 1.1. This 168 tooth flywheel fits the external balance 4.3/5.0/5.7 liter Chevy, 1986 to 1993 models with a one piece real main seal. The flywheel is drilled for 10.5 in Borg-Beck diaphragm, 11 in Borg-Beck diaphragm, long style and Mark XII clutches. It's weighs 30 lbs. Flywheel bolts included. Other applications available.
  • S.F.I. 1.1 Certified
  • Fits External Balance 4.3/5.0/5.7L Chevy
  • 168 Tooth Flywheel
  • Drilled 10.5 In And 11 In Clutches
  • Weighs 30 Lbs

Information:

New flywheel bolts should be used with a new flywheel, Mr. Gasket # 912 flywheel bolt kit is recommended, 7/16-20 X 31/32" long. Install the flywheel bolts without the enclosed lock washers using medium strength, "Blue", thread locking compound applied to the threads. The threads on the bolts and in the crankshaft should be clean, free from any grease or oil. Tighten flywheel bolts to 70-80 ft-lbs with a torque wrench.

Application Summary:

Year Make/Model
1991-1993 Buick Commercial Chassis
1986-1987 Buick Regal
1991-1993 Buick Roadmaster
1986-1993 Chevrolet Astro
1987-1993 Chevrolet Blazer
1986 Chevrolet C10
1986 Chevrolet C10 Suburban
1988-1993 Chevrolet C1500
1992-1993 Chevrolet C1500 Suburban
1986-1987 Chevrolet C20
1986 Chevrolet C20 Suburban
1988-1993 Chevrolet C2500
1992-1993 Chevrolet C2500 Suburban
1986 Chevrolet C30
1986-1993 Chevrolet C35
1988-1993 Chevrolet C3500
1986-1993 Chevrolet Camaro
1986-1993 Chevrolet Caprice
1986-1993 Chevrolet Corvette
1986-1987 Chevrolet El Camino
1986-1993 Chevrolet G10
1986-1993 Chevrolet G20
1986-1993 Chevrolet G30
1986 Chevrolet K10
1986 Chevrolet K10 Suburban
1988-1993 Chevrolet K1500
1992-1993 Chevrolet K1500 Suburban
1986 Chevrolet K20
1986 Chevrolet K20 Suburban
1988-1993 Chevrolet K2500
1992-1993 Chevrolet K2500 Suburban
1986 Chevrolet K30
1988-1993 Chevrolet K3500
1986 Chevrolet K5 Blazer
1986-1988 Chevrolet Monte Carlo
1987 Chevrolet R10
1987-1988 Chevrolet R10 Suburban
1989-1991 Chevrolet R1500 Suburban
1987-1988 Chevrolet R20
1987-1988 Chevrolet R20 Suburban
1989 Chevrolet R2500
1989-1991 Chevrolet R2500 Suburban
1987-1988 Chevrolet R30
1989-1991 Chevrolet R3500
1988-1993 Chevrolet S10
1988-1993 Chevrolet S10 Blazer
1987-1993 Chevrolet Suburban
1987 Chevrolet V10
1987-1988 Chevrolet V10 Suburban
1989-1991 Chevrolet V1500 Suburban
1987 Chevrolet V20
1987-1988 Chevrolet V20 Suburban
1989-1991 Chevrolet V2500 Suburban
1987-1988 Chevrolet V30
1989-1991 Chevrolet V3500
1986 GMC C1500
1988-1993 GMC C1500
1986 GMC C1500 Suburban
1992-1993 GMC C1500 Suburban
1986 GMC C2500
1988-1993 GMC C2500
1986 GMC C2500 Suburban
1992-1993 GMC C2500 Suburban
1986 GMC C3500
1988-1993 GMC C3500
1986-1987 GMC Caballero
1986-1993 GMC G1500
1986-1993 GMC G2500
1986-1993 GMC G3500
1986-1993 GMC Jimmy
1986 GMC K1500
1988-1993 GMC K1500
1986 GMC K1500 Suburban
1992-1993 GMC K1500 Suburban
1986 GMC K2500
Attributes
# of Teeth 168, 168
Application Chevy, Chevrolet
ASIN B000BWCARI
Brand Hays, Hays
California Proposition 65 No
Category Transmission and Drivetrain
Country of Origin (Primary) US
Coupler Bore Diameter 168
Crank Pilot Diameter (in) 2.06, 2.06
Emission Code 5, 5
Engine 4.3L V6, Small Block Chevy
Engine Balance External
Finish Steel
Harmonized Tariff Code (Schedule B) 8483506000
Hazardous Material Code N
Life Cycle Status Code Available to Order
Material Steel, Steel
NAFTA Preference Criterion Code B
Part Type Clutch Flywheel
Product Type Flywheels, Flywheels
Sale Category Transmission and Drivetrain
SDR Required Flag N
SFI Approved Yes, Yes
SFI Certification 1.1, 1.1
Tooth Quantity 168
Warranty Limited 90 Day Warranty, Manufacturer's Limited 90 Day Warranty
GTIN 00084041106303

Write a review.

Note: HTML is not translated.
    Bad           Good
Captcha code