Gen III Hemi EFI for use with 95 mm LS Style Throttle Body - Black Finish - Fits 2009-up 5.7L, 2005-2010 6.1L, and 2011-up 6.4L
Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7 to 7.2+ liter range, max power at 7500-8500 RPM.
- Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings
- Billet Oil Fill Cap – Attractive Low Profile Design
- Overall Height: 11.59”
- Cast Aluminum Construction w/ Natural Satin or Black Finish
- Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations
- Fits Gen III Hemi Engines w/ Large Intake Ports (1.70” Height x 1.88” Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L)
- Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System
- Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors
- Manifold Base – Available Separately for Custom Induction Systems
- Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold
- Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar)
- O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace
- Cast-In Pads for Adding Nitrous Nozzles
Information:
Early 2003-2008 5.7L Engines Can Use 300-652 adapters to Match the Smaller Intake Ports on these Engines.
The lid on this intake manifold is machined to fit an LS style throttle body since this allows the use a cable operated throttle body (at a reasonable cost).
The 80mm Gen III Hemi Throttle Body (drive by wire) Can Be Used on This Intake - Use w/ 300-660 Adapter Plate.
The 92mm Hellcat Gen III Hemi Throttle Body (drive by wire) Can Be Used on This Intake - Use w/ 300-661 Adapter Plate.
Application Summary:
| Year |
Make/Model |
| 2005-2020 |
Chrysler 300 |
| 2009 |
Chrysler Aspen |
| 2008-2020 |
Dodge Challenger |
| 2006-2020 |
Dodge Charger |
| 2009 |
Dodge Durango |
| 2011-2020 |
Dodge Durango |
| 2006-2008 |
Dodge Magnum |
| 2009-2010 |
Dodge Ram 1500 |
| 2009-2010 |
Dodge Ram 2500 |
| 2009 |
Dodge Ram 3500 |
| 2009-2010 |
Jeep Commander |
| 2006-2020 |
Jeep Grand Cherokee |
| 2011-2020 |
Ram 1500 |
| 2019-2020 |
Ram 1500 Classic |
| 2011-2020 |
Ram 2500 |
| 2011-2020 |
Ram 3500 |
| 2011-2020 |
Ram 4000 |
| Attributes |
| Basic Operating RPM Range |
1500-7000 |
| Brand |
Holley EFI, Holley EFI |
| California Proposition 65 |
No |
| Carburetor Flange |
N/A |
| Carburetor Quantity |
N/A |
| Carburetor Studs Included |
N/A |
| Category |
Air and Fuel Delivery, Intake Manifolds |
| Category Filter |
Intake Manifolds |
| Clearance Category |
Intake Manifolds |
| CNC Ported |
No |
| Color |
Black, Black |
| Construction |
Cast, Cast |
| Country of Origin (Primary) |
CN |
| Cylinder Head Port Shape |
Square |
| Deck Height |
9.25 |
| EGR Port |
No, No |
| Emission Code |
3, 3, Off Road |
| Engine |
GEN 3 HEMI, GEN 3 HEMI |
| Engine Make/Size |
Chrysler 5.7L Hemi Gen III, Chrysler 6.1L Hemi Gen III |
| Finish |
Black |
| Flange Style |
EFI, EFI |
| Front Height |
11.59 inch |
| Front Maximum Height |
11.59 IN, 11.59 |
| Fuel Injectors Included |
No, No |
| Fuel System Type |
EFI, EFI |
| Gasket Or Seal Included |
Yes, Yes |
| Grade Type |
Performance, Performance |
| Harmonized Tariff Code (Schedule B) |
8409915085 |
| Hazardous Material Code |
N |
| Injector Style Provision |
EV-1, Gen III Hemi |
| Inlet Size |
95mm, 95mm |
| Life Cycle Status Code |
Available to Order |
| Manifold Type |
Hi-Ram, Hi-Ram |
| Material |
Aluminum, Aluminum |
| NAFTA Preference Criterion Code |
B |
| Number of Carbs |
None; For Fuel Injection |
| Part Type |
Engine Intake Manifold, Engine Intake Manifold |
| Plenum Finish |
Black, Black |
| Port Size |
1.70" x 1.88", 1.70" x 1.88" |
| Position |
N/A |
| Product Type |
Intake Manifold, Intake Manifold |
| Rear Height |
10.35 inch |
| Rear Maximum Height |
10.35 IN, 10.35 |
| RPM Power Band |
1500-7000 |
| RPM Range |
1500-7000 |
| Runner Length |
6.65 inch, 6.65 inch |
| Sale Category |
Air and Fuel Delivery |
| SDR Required Flag |
N |
| Single Or Dual Plane Type |
Single Plane, Single Plane |
| Style |
EFI, EFI |
| Sub Category |
Cylinder Block Components, Cylinder Block Components |
| Throttle Body Bore Diameter |
95 MM, 95 MM |
| Throttle Body Gasket Included |
Yes |
| Throttle Bore |
95mm, 95mm |
| Type of Component |
Intake Manifold, Intake Manifold |
| Usage |
Racing |
| Vacuum Ports |
(2) 3/8" NPT & (1) 1/4" NPT, (2) 3/8" NPT & (1) 1/4" NPT |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty |
Limited 90 Day, Manufacturer's Limited 90 Day Warranty |
| GTIN |
00090127105054 |
