1600 PSI Stainless Pressure Sensor
1600 PSI Stainless Pressure Sensor
1600 PSI Stainless Pressure Sensor
- 0-1600 PSI
- Stainless steel
- Preconfigured for use in Dominator and HP systems
- Has linear voltage output range of 0.5 - 4.5 volts
- Pigtail is included with the sensor
Information:
It is not recommended to directly mount a pressure transducer directly to the engine. It is best to remote mount the transducer. Extreme vibration can result in premature failure.| Attributes | |
| Body Diameter | .875" |
| Body Length | 2.558 in., 2.558" |
| Body Length (in.) | 2.558 |
| Brand | Holley EFI, Holley EFI |
| California Proposition 65 | No |
| Category | Air and Fuel Delivery |
| Connector Gender | Male |
| Connector Quantity | 1 |
| Country of Origin (Primary) | US |
| Emission Code | 5, 5 |
| Fuel System Type | EFI |
| Grade Type | Performance |
| Harmonized Tariff Code (Schedule B) | 8409915085 |
| Hazardous Material Code | N |
| Inlet Diameter | 0.1250 in. |
| Inlet Size | 1/8 inch NPT, 1/8 inch NPT |
| Life Cycle Status Code | Available to Order |
| Linear voltage output | .5 - 4.5 Volts, .5 - 4.5 Volts |
| Material | Stainless Steel, Stainless Steel |
| Maximum Pressure Reading | 1600 PS, 1600 |
| Mount Type | Screw-In |
| NAFTA Preference Criterion Code | B |
| Part Type | Fuel Injection Pressure Sensor |
| Pressure | 0-1600 PSI |
| Pressure Range | 0-1600 PSI, 0-1600 PSI |
| Product Type | Pressure Senser - Transducer, Pressure Senser - Transducer |
| reference voltage required | 5 Volts, 5 Volts |
| Sale Category | Air and Fuel Delivery |
| SDR Required Flag | N |
| Sub Category | Sensors |
| Terminal Gender | Female |
| Terminal Quantity | 1 |
| Threaded End Diameter | 1/8-27 NPT, 1/8-27 NPT IN |
| Warning | California Proposition 65, California Proposition 65 |
| GTIN | 00090127668696 |