Plug and Play CANbus Exhaust Gas Temperature Kit, for Holley EFI.
Introducing the Holley EFI 8 Channel CANBus EGT Kit. Exhaust Gas Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to quickly identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The probes come in 4 different lengths ensuring a clean looking installation. The included 316 stainless steel bungs feature a built in step, making bung installation as easy as possible. Everything needed to upgrade your exhaust system is included, such as 1/4" 316 Stainless Steel EGT Bungs, 8 EGT Sensors, and the 8 Channel CANbus EGT controller!
Introducing the Holley EFI 8 Channel CANBus EGT Kit. Exhaust Gas Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to quickly identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The probes come in 4 different lengths ensuring a clean looking installation. The included 316 stainless steel bungs feature a built in step, making bung installation as easy as possible. Everything needed to upgrade your exhaust system is included, such as 1/4" 316 Stainless Steel EGT Bungs, 8 EGT Sensors, and the 8 Channel CANbus EGT controller!
- Compatible with HP or Dominator EFI, and Terminator X EFI.
- Plug and Play 8 Channel CAN EGT Module, for a quick and easy installation
- High Quality ¼” Stepped Stainless Steel EGT Weld Bungs
- 8x- Robust ¼” EGT Probes, designed to withstand the extreme cylinder pressures
- 4’ CAN Extension Harness
- 8x Analog output wires, to be used with non-Holley EFI installations
Information:
HP or Dominator ECU requires V5 Build 100 or newer software/ firmware. Terminator X ECU requires software version 1.0 Build 102 or newer| Attributes | |
| Brand | Holley EFI |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category | Emission Control |
| Connector Color | Black |
| Country of Origin (Primary) | US |
| Emission Code | 4, 5 |
| Grade Type | Performance |
| Harmonized Tariff Code (Schedule B) | 8409915085 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Material | ABS Composite |
| Mounting Type | Bolt On |
| NAFTA Preference Criterion Code | B |
| Part Type | Exhaust Gas Temperature (EGT) Sensor |
| Product Type | Exhaust Gas Temperature Kit (EGT), Exhaust Gas Temperature Kit (EGT) |
| Sale Category | Air and Fuel Delivery |
| SDR Required Flag | N |
| Sub Category | Sensors |
| Warning | California Proposition 65, California Proposition 65 |
| GTIN | 00090127069066 |